Pulp mills make pulp from wood chips, separating the fibers by a grinding process, enzymatic or chemical action, heat or pressure, used either alone or in combination. After pulping, the pulps intended for use in white papers are transferred to the mill's bleach plant.
Paper mills receive that pulp and make paper out of it. They do not bleach paper on the scale used in bleach plants, although they may add a bleach to the slurried pulp to prevent yellowing (usually in groundwood pulps) before sending it to the paper machine. If they want to make white paper, they generally use white pulp.
Sometimes paper mills buy their pulp on the market, and sometimes they get it from a pulp mill located on the same site.
There are two main kinds of pulp, mechanical and chemical.
Mechanical. If pulping is done mainly by mechanical or physical means, the product is called groundwood or "mechanical" pulp. Lignin is deliberately left in this kind of pulp, for economic reasons. Groundwood is made by grinding whole wood logs against a rotating stone. Mechanical pulps are made from wood chips by passing the chips through refiners. The refiners produce refiner mechanical pulp; if heat is used, thermomechanical pulp; if chemicals are used, chemimechanical; and if both heat and chemicals are used, thermochemimechanical (or chemithermomechanical) pulp.
Mechanical pulps are used to make newsprint and magazine paper, as well as boxes and a variety of other products. (Although grocery bags are brown, they are made not from mechanical pulp, but from unbleached kraft.) If mechanical pulp will be used for printed matter, it is bleached, usually with hydrogen peroxide, which is able to whiten the pulp without removing the lignin.
Chemical. There are two main chemical pulping processes: kraft or sulphate (alkaline), and sulphite (which may be acid, neutral or alkaline). Most pulp mills in the U.S. and worldwide use the kraft process, while most European mills use one of the sulphite processes.
Many people assume that the chemicals used in pulping give the fibers a permanent and fixed pH; that is, if an alkaline pulping process is used, they believe paper made from that pulp will be alkaline. Not true. The pulp is washed at the pulp mill, and when it gets to the paper mill, the pH of the stock is under the complete control of the papermaker. The paper produced can have a pH anywhere from 4.0 to 10.0 (or even outside that range, for specialty papers), regardless of the pulping or bleaching process it underwent earlier.
In order to make chemical pulp for "freesheet" or "woodfree" (printing and writing) paper, wood chips are cooked under pressure, with the aid of chemicals, in order to dissolve the lignin and separate the fibers. Chemicals are selected to act on the lignin and to have a minimal effect on the cellulose; temperature and pressure are not simply maximized to save time, but are chosen to give the best effect. Those who understand and carry out the chemical pulping process know the importance of retaining fiber strength. If the fiber is degraded, the pulp or paper made from it may be impossible to sell, so fiber strength is monitored, using standard tests.
Ten or twelve years ago, the standard bleaching sequence for kraft mills included elemental chlorine and chlorine dioxide, combined with alkaline extraction. Then it was learned that certain toxic chlorine compounds, collectively called "dioxin" in the press, were showing up in the mills' effluent. Spurred by EPA regulations, most mills are now bleaching without the elemental (gaseous) chlorine, in a process called "elemental chlorine free," which reduces the dioxin to undetectable levels, and has no measurable effect on the fish that live in the river that receives the mill's effluent.
The effect of the bleaching process on fiber is carefully monitored, and a growing variety of bleaching agents and sequences are available to optimize both brightness and retention of fiber strength.
Stock preparation. Before pulp goes to the paper machine, it has to be refined (beaten) to increase fiber to fiber bonding potential and make a stronger paper. If it is beaten too much, tear strength suffers while tensile strength and burst continue to increase; the pulp sheet becomes denser, less porous, more translucent and more likely to swell and cockle in contact with water.
Most papermaking chemicals are added at this stage. Each grade of paper requires a specific combination of furnish ingredients which are selected according to the specifications of the paper being produced. This includes acids or bases to control pH, sizing agents, dry strength adhesives (starch, gums), wet strength resins, fillers (e.g., clay, CaCO3), dyes and pigments, drainage aids, and optical brighteners.
The fourdrinier or "wet end": The stock mixture is pumped to the headbox of the fourdrinier and spread onto the moving "wire" or screen below, which vibrates to induce microturbulence in the stock as the water drains through. Vacuum boxes below the wire speed the drainage. An increasingly popular way to speed up the papermaking process is to use a twin-wire former (or other mechanism), to draw the water off simultaneously from above and below. At the end of the wire the paper web is transferred to the couch ("cooch") felt with vacuum from the couch roll to lift the paper off the wire and lead it into the dry end.
The dry end: The mat of fibers on its endless belt of felt is carried around or past the presses (rolls which squeeze out excess water), first dryer (a set of steam-heated drums), size press (to apply surface additives), calender (a set of high-pressure rolls), and paper machine reel. Coating may be done either on the machine or in another location.
After the paper is made, it is sent to a converter if it has to be cut to size, packaged, made into bags and boxes, or otherwise prepared for use. (Some mills, however, do their own converting.) If the paper was made to order for a certain customer, it is shipped directly to that customer. If it will be sold on the open market, it usually goes to a distributor, whose customers include printers and office supply stores. Some distributors have their own retail outlets for customers who buy small amounts for personal use.
Since paper passes through so many hands, few salespeople know which products meet permanence standards, or even whether a given product is acid-free (alkaline). This information is not usually found on the package, and few papers made in this country carry watermarks to show whether they are alkaline or permanent. Thus the complexity of the marketing process deprives many customers of important information relating to their own paper requirements.
I have tried to describe a complex, variable, rapidly evolving process, which is really a number of processes, because each mill has a unique set of methods. It is probably impossible to make any generalization about papermaking that does not have important exceptions.
To fill out the picture, normally I would recommend a few books, but the textbooks that cover industrial papermaking are generally either quite technical or too narrow in focus, and books on hand papermaking do not cover industrial processes. One way to learn more is to take a course or workshop at a papermaking school. The Institute for Paper Science and Technology (IPST) in Atlanta can provide a list of paper schools. Call 404/894-7819.
The recently issued second edition of Saltman's Pulp and Paper Primer may serve the purpose. Although it has only 32 pages, the publisher's blurb says it "offers a complete introduction and nontechnical explanation of the pulping and papermaking industry. the book offers detailed explanations of the pulping process, papermaking operation, finishing and converting procedures, and auxiliary support systems, and provides a history of the paper industry and shows its economic importance." It was revised and updated by Laura Thompson, and published by TAPPI (item no. 0101R110). Price for non-TAPPI members: $20. Call 800/332-8686. ISBN 89852-344-3.
For an illustrated coverage of papermaking, there are two possibilities, a slide show and a set of CD-ROMs. The slide show, "Paper Clips," is a set of 25 slides accompanied by a detailed script, for classroom presentations "to audiences of all ages." $25 from TAPPI. Manufacture is one of four topics it covers.
"How Paper is Made/Highlights" is a one- or two-hour CD-ROM that "offers just enough information for printers, converters, students, and the public to get a clear idea of what's involved in making paper." (It was condensed from the eight-hour-long CD-ROM set intended for training technical people in the mill, entitled "How Paper is Made: An Overview of Pulping and Papermaking from Woodyard to Finished Product.") The Highlights CD-ROM can be ordered from TAPPI for $99 ($16 members).
I am indebted to Terry Norris, Bill Scott and Michael Kocurek for reviewing the accuracy and completeness of this chapter from North American Permanent Paper, which has also been mounted on Abbey Publications' web site at <http://palimpsest.stanford.edu/byorg/abbey/>. It has been slightly revised for publication in the last issue of the Alkaline Paper Advocate.
1. Lockwood-Post's Directory of the Pulp, Paper and Allied Trades. Annual. Miller Freeman, in California, 408/848-5296. Regular ed. $257; traveler's ed., $217; add shipping & handling. About 1000 pages, with over 16 sections, including statistics of the industry, executive offices, pulp & paper mills (which itemizes personnel, equipment, and products), paper merchants & distributors, watermarks & brands, wood pulp agents, and more. Mills, converters, and merchants are listed geographically.
2. The Paper Buyers' Encyclopedia. Annual. Grade Finders, Inc., 662 Exton Commons, Exton, PA 19341 (610/524-7070). E-mail: firstname.lastname@example.org. $95. Lists manufacturers, converters, and suppliers; then the "Grade Finder Section," which lists papers by classification and gives detailed information for each. Classification is based on the use (e.g., offset, reply card), physical and special characteristics (e.g., coated, watermarked, recycled) of the papers, and quality or grade (super premium, super premium no. 1, premium no. 1, and numbers 1, 2, 3, 4 and 5). This is the only reference book in the paper industry that indicates whether a particular paper is alkaline or not.
The last 180 pages in the volume have lists and indexes, a section on "How to Buy Paper," a glossary, and an index of all the papers in the main list, among other things. The Grade Finder section can be bought as a separate book, called the Competitive Grade Finder.
3. Walden's ABC Guide and Paper Production Yearbook. Annual. $135 + $5 shipping. Walden-Mott Corp. 6" x 9". 648 pages. Sections:
|White pages:||Paper trade associations|
Manufacturers & converters (geographical and alphabetical)
Suppliers to pulp & paper mills
|Pink pages:||A to Z directory of manufacturers, converters, sales agents & representatives, and paper merchants|
|Blue pages:||Sales agents & representatives, including mill representatives, pulp agents, brokers, trading companies & manufacturers of market pulp|
|White pages:||Paper merchants, U.S. & Canada|
|Yellow pp.:||Classified list of paper, paper products and other items sold through paper merchants|
4. Walden's Paper Catalog. Annual, $50. Subscription to twice-yearly version, $75. Walden-Mott Corp., 225 N. Franklin Turnpike, Ramsey, NJ 07446 (201/818-8630). Sections: Paper Distributors, Brand Names Index, Mill Catalog, Papers by Grade, and Paper Company Index.
1. Gary A. Smook, Handbook for Pulp & Paper Technologists. 2nd ed., 1992. 395 pp., well illustrated, with glossary and detailed index. $56 to TAPPI members, from TAPPI, PO Box 105113, Atlanta, GA 30348 (707/446-1400), or the Canadian Pulp & Paper Association, 1155 Metcalfe St., 19th fl., Montreal, Quebec, Canada H3B 4T6 (514/866-6621).
2. Gary A. Smook, Handbook of Pulp & Paper Terminology: a Guide to Industrial and Technological Usage, 1990. Angus Wilde Publications, 481 W. 21st Av., Vancouver, BC, Canada V5Y 2E6. Available in the U.S. from Angus Wilde Publications, PO Box 1036, Bellingham, WA 98227-1036. 447 pp. ISBN 0-9694628-0-8.
3. Dan Eklund and Tom Lindström, Paper Chemistry: an Introduction. 1991. DT Paper Science Publications, Mariavägen 9, Grankulla, Finland. 305 pp. $85 for the softcovered.
4. J.C. Roberts, ed., Paper Chemistry. Blackie, Glasgow and London; published in the USA by Chapman and Hall, New York, 1991. 234 pp. $127.50 for hardcover ed. Copyright is held by the publisher. Mystery: If J.C. Roberts is the editor, who wrote it?
Timestamp: Sunday, 03-Mar-2013 21:42:56 PST
Retrieved: Tuesday, 24-Apr-2018 14:28:07 GMT
Timestamp: Sunday, 03-Mar-2013 21:42:56 PST
Retrieved: Tuesday, 24-Apr-2018 14:28:07 GMT